[2020-March-New]100% Exam Pass-300-430 Exam Dumps VCE Free from Braindump2go

March/2020 New 300-430 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 300-430 Exam Questions,

New Question
For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu.
Which kind of traffic does this change apply to, as soon as the change is made?

A.    wireless traffic only
B.    wired traffic only
C.    VPN traffic
D.    wireless and wired traffic


Continue reading “[2020-March-New]100% Exam Pass-300-430 Exam Dumps VCE Free from Braindump2go”

[2020-March-New]300-415 Dumps VCE 218Q Instant Download in Braindump2go

March/2020 New 300-415 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 300-415 Exam Questions,

New Question
Which device information is required on PNP/ZTP to support the zero touch onboarding process?

A.    serial and chassis numbers
B.    interface IP address
C.    public DNS entry
D.    system IP address

Continue reading “[2020-March-New]300-415 Dumps VCE 218Q Instant Download in Braindump2go”

[2020-New-Exams]Braindump2go 300-425 Exam VCE and PDF Dumps Instant Download

March/2020 New Braindump2go 300-425 Exam Dumps with PDF and VCE Free Released Today! Following are some new 300-425 Exam Questions,

New Question
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas.
Which two elements have a negative effect on the wireless users? (Choose two.)

A.    wireless channels
B.    access point height
C.    client authentication
D.    client authorization
E.    absorption

Continue reading “[2020-New-Exams]Braindump2go 300-425 Exam VCE and PDF Dumps Instant Download”

[2020-New-Exams]Instant Download Braindump2go 300-410 PDF and 300-410 VCE 76Q

March/2020 New Braindump2go 300-410 Exam Dumps with PDF and VCE Free Released Today! Following are some new 300-410 Exam Questions,

New Question

Refer to the exhibit. A router receiving BGP routing updates from multiple neighbors for routers in AS 690.

What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.10.1?
  

A.    The local preference value in another neighbor statement is higher than 250.

B.    The local preference value should be set to the same value as the weight in the route map.

C.    The route map is applied in the wrong direction.

D.    The weight value in another statement is higher than 200.


Continue reading “[2020-New-Exams]Instant Download Braindump2go 300-410 PDF and 300-410 VCE 76Q”

[2020-New Exams!]Download 200-301 PDF Dumps from Braindump2go

March/2020 New CCNA 200-301 Exam Dumps with PDF and VCE New Released Today! Following are some new 200-301 Real Exam Questions!

New Question
What is a benefit of using a Cisco Wireless LAN Controller?
 
A.    Central AP management requires more complex configurations
B.    Unique SSIDs cannot use the same authentication method
C.    It supports autonomous and lightweight APs
D.    It eliminates the need to configure each access point individually

Continue reading “[2020-New Exams!]Download 200-301 PDF Dumps from Braindump2go”

[2020-New Exams!]Real 200-301 Dumps 153Q Free Download in Braindump2go

March/2020 New CCNA 200-301 Exam Dumps with PDF and VCE New Released Today! Following are some new 200-301 Real Exam Questions!

New Question
Which two values or settings must be entered when configuring a new WLAN in the Cisco Wireless LAN Controller GUI? (Choose two)

A.    management interface settings
B.    QoS settings
C.    Ip address of one or more access points
D.    SSID
E.    Profile name

Correct Answer: DE

New Question
What are two benefits of network automation? (Choose two)

A.    reduced operational costs
B.    reduced hardware footprint
C.    faster changes with more reliable results
D.    fewer network failures
E.    increased network security
 
Correct Answer: AC

New Question
Which command prevents passwords from being stored in the configuration as plaintext on a router or switch?

A.    enable secret
B.    service password-encryption
C.    username Cisco password encrypt
D.    enable password

Correct Answer: B

New Question
Drag and Drop Question
Drag drop the descriptions from the left on to the correct configuration-management technologies on the right.
Select and Place:
 
Correct Answer:

Explanation:
The focus of Ansible is to be streamlined and fast, and to require no node agent installation. Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef. TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file . This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.
Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative- paradigm programming approach.
A Puppet piece of code is called a manifest, and is a file with .pp extension.

New Question
Drag and Drop Question
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.
Select and Place:
 
Correct Answer:


New Question
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.

Select and Place:

Correct Answer:

Explanation:
The service port can be used management purposes, primarily for out-of-band management. However, AP management traffic is not possible across the service port. In most cases, the service port is used as a “last resort” means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol (DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/ports_and_interfaces.html

New Question
Drag and Drop Question
Drag and drop the threat-mitigation techniques from the left onto the types of threat or attack they mitigate on the right.
Select and Place:
 

Correct Answer:
 
Double-Tagging attack:
 
In this attack, the attacking computer generates frames with two 802.1Q tags. The first tag matches the native VLAN of the trunk port (VLAN 10 in this case), and the second matches the VLAN of a host it wants to attack (VLAN 20).
When the packet from the attacker reaches Switch A, Switch A only sees the first VLAN 10 and it matches with its native VLAN 10 so this VLAN tag is removed. Switch A forwards the frame out all links with the same native VLAN 10. Switch B receives the frame with an tag of VLAN 20 so it removes this tag and forwards out to the Victim computer.
Note: This attack only works if the trunk (between two switches) has the same native VLAN as the attacker.
To mitigate this type of attack, you can use VLAN access control lists (VACLs, which applies to all traffic within a VLAN. We can use VACL to drop attacker traffic to specific victims/servers) or implement Private VLANs.
ARP attack (like ARP poisoning/spoofing) is a type of attack in which a malicious actor sends falsified ARP messages over a local area network as ARP allows a gratuitous reply from a host even if an ARP request was not received. This results in the linking of an attacker’s MAC address with the IP address of a legitimate computer or server on the network. This is an attack based on ARP which is at Layer 2. Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network which can be used to mitigate this type of attack.

New Question
Drag and Drop Question
Drag and drop the functions from the left onto the correct network components on the right.
Select and Place:
 

Correct Answer:

New Question
Drag and Drop Question
Drag and drop the AAA functions from the left onto the correct AAA services on the right.

Select and Place:
 

Correct Answer:

New Question
Drag and Drop Question

Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right

Select and Place:
 

Correct Answer:

Explanation:
This subnet question requires us to grasp how to subnet very well. To quickly find out the subnet range, we have to find out the increment and the network address of each subnet. Let’s take an example with the subnet 172.28.228.144/18:
From the /18 (= 1100 0000 in the 3rd octet), we find out the increment is 64. Therefore the network address of this subnet must be the greatest multiple of the increment but not greater than the value in the 3rd octet (228). We can find out the 3rd octet of the network address is 192 (because 192 = 64 * 3 and 192 < 228) -> The network address is 172.28.192.0. So the first usable host should be 172.28.192.1 and it matches with the 5th answer on the right. In this case we don’t need to calculate the broadcast address because we found the correct answer.
Let’s take another example with subnet 172.28.228.144/23 -> The increment is 2 (as /23 = 1111 1110 in 3rd octet) -> The 3rd octet of the network address is 228 (because 228 is the multiply of 2 and equal to the 3rd octet) -> The network address is 172.28.228.0 -> The first usable host is 172.28.228.1. It is not necessary but if we want to find out the broadcast address of this subnet, we can find out the next network address, which is 172.28.(228 + the increment number).0 or 172.28.230.0 then reduce 1 bit -> 172.28.229.255 is the broadcast address of our subnet. Therefore the last usable host is 172.28.229.254.

New Question
Drag and Drop Question

Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.

Select and Place:
 

Correct Answer:

Explanation:
Layer 2 Security Mechanism includes WPA+WPA2, 802.1X, Static WEP, CKIP while Layer 3 Security Mechanisms (for WLAN) includes IPSec, VPN Pass-Through, Web Passthrough … Reference:         
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/106082-wlc-compatibility-matrix.html


Resources from:


1.2020 Latest Braindump2go 200-301 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/200-301.html

2.2020 Latest Braindump2go 200-301 PDF and 200-301 VCE Dumps Free Share:
https://drive.google.com/drive/folders/1N579lVwFMNcTo1QgOz_B6__zxBTx36ev?usp=sharing

3.2020 Latest Braindump2go 200-301 PDF and 200-301 VCE Dumps Free Share:
https://od.lk/fl/NDZfMTE3ODI2Nl8

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!

[2020-New Exams!]Download Braindump2go 200-301 Dumps with PDF and VCE for Free

March/2020 New CCNA 200-301 Exam Dumps with PDF and VCE New Released Today! Following are some new 200-301 Real Exam Questions!

New Question
Which statement correctly compares traditional networks and controller-based networks?

A.    Only traditional networks offer a centralized control plane
B.    Only traditional networks natively support centralized management
C.    Traditional and controller-based networks abstract policies from device configurations
D.    Only controller-based networks decouple the control plane and the data plane

Continue reading “[2020-New Exams!]Download Braindump2go 200-301 Dumps with PDF and VCE for Free”

[2020-New-Exams!]Braindump2go 300-420 Exam VCE and PDF 76Q Dumps Free Share

March/2020 New Braindump2go CCNP 300-420 Exam Dumps with PDF and VCE Free Released Today! Following are some new 300-420 Exam Questions!

New Question
Which routes does the overlay management protocol advertise in an SD-WAN overlay?

A.    underlay, MPLS, and overlay
B.    primary, backup, and load-balanced
C.    prefix, TLOC, and service
D.    Internet, MPLS, and backup

Continue reading “[2020-New-Exams!]Braindump2go 300-420 Exam VCE and PDF 76Q Dumps Free Share”

[2020-New-Exams]Free Share Braindump2go 350-401 Exam Dumps 121Q Instant Download

2020/March Braindump2go 350-401 Exam Dumps with PDF and VCE New Updated Today! Following are some new 350-401 Exam Questions!

New Question
What is a benefit of data modeling languages like YANG?

A.    They enable programmers to change or write their own application within the device operating system.
B.    They create more secure and efficient SNMP OIDs.
C.    They make the CLI simpler and more efficient.
D.    They provide a standardized data structure, which results in configuration scalability and consistency.

Continue reading “[2020-New-Exams]Free Share Braindump2go 350-401 Exam Dumps 121Q Instant Download”

[2020-New-Exams]Download Free Braindump2go 350-501 VCE Dumps for 350-501 Dumps with PDF and VCE

2020/March New Cisco Exam 350-501 Dumps with PDF and VCE New Released! Following are some new 350-501 Exam Questions,

New Question
How can a network administrator secure rest APIs?

A.    They can allow read and write privileges to all users
B.    They can ensure that user sessions are authenticated using TACACS+ only
C.    They can have a general administrator login for multiple users to access that has command entries logged
D.    They can authenticate user sessions and provide the appropriate privilege level

Continue reading “[2020-New-Exams]Download Free Braindump2go 350-501 VCE Dumps for 350-501 Dumps with PDF and VCE”

Pages: 1 2 3 4 5 6 7 ... 74 75